Magtek DynaPro Mini Programmer's99875629 Instrukcja Użytkownika Pobierz pdf (Strona 55)

3 - Command Set

DynaPro Mini| PIN Encryption Device | Programmer’s Reference (Commands)

Page 55

Bit

Byte 26..31

Data on BIN Table Slot 5

Byte 32..37

Data on BIN Table Slot 6

An error will be reported in ACKSTS of Report 0x01 – Response ACK in the following cases:

 Bad parameter (0x82)

 System is not available (0x8A)

3.4.31 Report 0xFF – Device Reset

This command causes the device to perform a restart.

Table 3-46 – Usage Table for Report 0xFF

Bit

Byte 0

0xFF

Byte 1

0 – Soft Reset

Byte 2

Reserved

3.5 General Input Reports

Input reports are asynchronous data packets (i.e., events) sent from the device to the host using a USB

Interrupt IN transaction. Events occur when the device state changes or when an asynchronous command

(such as a command that requires user input) has completed.

3.5.1 Report 0x20 – Device State Report

This event is triggered explicitly when the host successfully issues Report 0x08 – Request Device

Status, or automatically when the device changes state. Both cases cause the device to send Device State,

Session State, Device Status, Device Certificate Status, and Hardware Status to the host.

Table 3-47 - Usage Table for Report 0x20

Bit

Byte 0

0x20

Byte 1

Device State (see Appendix C Status and Message Table)

Byte 2

Session State (see Appendix C Status and Message Table)

Byte 3

Device Status (see Appendix C Status and Message Table)

Byte 4

Device Certificate Status (see Appendix C Status and Message Table)

Byte 5

Hardware Status (see Appendix C Status and Message Table)

Byte 6

ICC Master and Session Key Status

Bit 0: 1 = No Acquirer Master Key Injected

Bit 1: 1 = No ICC Session Key Active

Bit 2: 1 = CAPK EMV database corrupted

Bit 3: 1 = Terminal/Payment Brand EMV Database corrupted

Bit 4: 1 = Card Present in smart card connector

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 113 114

Komentarze do niniejszej Instrukcji

Brak uwag

Magtek DynaPro Mini Programmer's99875629 Instrukcja Użytkownika Strona 55

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekwipunek Magtek DynaPro Mini Programmer's99875629